Which interfaces have Control Integration and Gain Tracking within Smaart?
Smaart can control the gain and phantom power of certain audio recording devices directly from within the "Input Meters" view. To access Input Meters, navigate to the View menu in the top menu bar of the program and select View > Input Meters, or use the Hot Key combo [Shift] + [E].
Devices with control integration will also allow for Gain Tracking, which is enabled in the Input Configuration dialog as a check box below that devices signal meters. With Gain Tracking enabled a calibrated input will re-calculate its dB offset when the gain for that device is adjusted. Please note that the recalculation is not perfect, so you might see a +/- 1dB difference depending on how large the gain change is.
The following audio devices support gain tracking:
- Smaart IO (discontinued)
- Roland Octacapture
- Audient EVO 4, 8, 16 (v9.1 or later, Audient EVO SP8 is not supported. Click here for more info)
Please note that gain tracking is only available in Smaart 8 or later.